Lesson Two: Things You Need to Know

To begin, open Microsoft Word. 

Click On

During the lessons that follow, you will be asked to "click on" items. When asked: 

Point to the item.

Press the left mouse button.

Point to the item.

Quickly press the left mouse button twice.

Following is an introduction to various features of the Microsoft Word screen. 

Status Bar

The Status bar appears at the very bottom of the screen and provides such information as the current page, current section, total number of pages, inches from the top of the page, current line number, and current column number. The Status bar also provides options that enable you to track changes or turn on the Record mode, the Extension mode, the Overtype mode, and, optionaly, WordPerfect help. 

Horizontal and Vertical Scroll Bars

The Horizontal and Vertical scroll bars, if turned on, enable you to move up and down or across the window simply by pressing the icons located on the scroll bars. The Horizontal scroll bar is located above the Status bar. The Vertical scroll bar is located along the right side of the screen. 

Nonprinting Characters

Certain characters do not print but do affect the document layout. You can elect to see these characters on the screen as you type or have them remain invisible. For these lessons, we will opt to see them onscreen. Here they are: 
 
 

	Denotes a tab
.	Denotes a space
¶	Denotes the end of a paragraph
....	Denotes hidden text
Ø	Denotes a nonbreaking hyphen

Recently Used File List

If you enable the recently used file list, clicking on File displays the most recently opened files near the bottom of the drop-down menu. You can click on the filename to quickly open the file. 

Setting Options

Before proceeding, turn on the Status bar, Horizontal scroll bar, Vertical scroll bar, nonprinting characters, and the recently used file list. Follow the procedure outlined below: 

Click on Tools.

Highlight Options.

Press Enter.

Click on the View tab.

In the Window frame, check to see if there are checkmarks next to Status Bar, Horizontal Scroll Bar, and Vertical Scroll Bar.

If there is no checkmark next to one or more of these items, go to the box next to the unchecked item(s) and click the left mouse button.
Note: You toggle the checkmark on and off  by clicking the left mouse button. 

In the Nonprinting Characters frame, check to see if there is a checkmark next to All.

If there is no checkmark next to All, go to the box next to All and click the left mouse button. A checkmark should appear.

Click on the General tab.

Check to see if there is a checkmark next to the Recently Used File List. If there is no checkmark, go to the box next to Recently Used File List and click the left mouse button. Check to see if the number in the Entries box is at least four. If it is not, type 4 in the box.

Check to see if Inches is selected in the Measurement Units box (this sets the unit of measurement for the ruler). If it is not, click on the pull-down menu and then click on Inches.

Click on OK to close the dialog box.

Throughout these lessons you will be asked to highlight text. You can use either of the following methods: 

Highlighting by Using the F8 and Arrow Keys

Place the cursor before or after the text you wish to highlight and click the left mouse button.

Press the F8 key, which will serve as an "anchor" showing where text you wish to highlight begins or ends.

Press the appropriate arrow key (left arrow to move to the left, or right arrow to move to the right) until the text is highlighted. You can use the up or down arrow key to highlight one line at a time. Press Esc to remove the anchor.

Place the cursor before or after the text you wish to highlight.

Hold down the left mouse button.

Move the mouse left, right, up, or down until the text is highlighted.

Menu Bar

To select a Menu bar item: 

Click on the Menu bar item. A drop-down menu will appear.

To change the Menu bar option selected, move the mouse pointer across the Menu bar while holding down the left mouse button. 
Note: After you highlight an item on the Menu bar, you can also use the left and right arrow keys to move across the Menu bar.

When you click on any option on the Menu bar, a drop-down menu will appear. To highlight a drop-down menu item: 

Move up or down the drop-down menu while holding down the left mouse button.

Press Enter to select a drop-down menu item.
Note: You can also use the arrow keys to move up and down the drop-down menu.

During the lessons, you will often be asked to place the cursor at a specific location on the screen. You place the cursor by pointing to the location specified and pressing the left mouse button or by using the arrow keys to move to the specified location. 

Choosing Menu Commands by Using the Alt Key

There are many methods to accomplish tasks using Microsoft Word. Generally, when selecting items from the menu, we will ask you to click on or highlight the menu item. However, you can also select a menu option by 

Pressing the Alt key while typing the underlined letter on the Menu bar.

Typing the letter underlined on a drop-down menu. If a dialog box appears, you can move around the dialog box by pressing the Alt key and any underlined option.

Hold down the Alt key and press "o" to select Format from the menu.

Press "p" to select Paragraph from the drop-down menu.

Hold down the Alt key and press "i" to select the Indents and Spacing tab.

Hold down the Alt key and press "b" to select Before from the Spacing frame.

Press Enter to close the dialog box.

A key name followed by a dash and a letter means to hold down the key while pressing the letter. For example, Alt-o means you should hold down the Alt key while pressing "o." A shorthand notation of the above demonstration would read as follows: 

1. Press Alt-o, p.
2. Press Alt-i.
3. Press Alt-b.
4. Press Enter.

Starting a New Paragraph

When you type in Microsoft Word, you do not need to press a key to move to a new line as you do when typing with a typewriter. To start a new paragraph, press the Enter key. 

Exiting Microsoft Word

You have completed this lesson. Typically you would save your work before exiting. This lesson does not require you to enter any text, so you might have nothing to save. To exit Microsoft Word: 

Click on File.

Highlight Exit, which can be found at the bottom of the drop-down menu.

Press Enter.

If you have entered text, you will be prompted: "Do you want to save changes to Document1?" To save your changes, click on Yes. Otherwise, click on No.

Specify the correct directory in the Save In box.

Name your file by typing lesson2.doc in the File Name field.

Click on Save.

Demonstrative and Interactive Lessons:

Status and Scroll Bar - Demonstrative Lesson

Status and Scroll Bar - Interactive Lesson